| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | One Year |
|
Still deciding? Get samples of US$ 5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | device name | quantity |
| 1. | Spiraling feeding machine | 2sets |
| 2. | SJ90 Conical Twin Screw Extruder | 1 set |
| 3. | Mold&die | 1 set |
| 4. | Vacuum Calibration Tank | 1 set |
| 5. | Haul off machine | 1 set |
| 6. | Cutting Machine | 1 set |
| 7. | Storage Rack | 1 set |
| Parameter name | technical parameter | |
crowd go out machine |
Electrical appliance control cabinet manufacturer | Main frequency converter and feeding frequency converter: contactor, circuit breaker, etc.: |
| Maximum extrusion volume (kg / h) | At 200 - 250 kg / h, in a good plasticizing state. | |
| Gear bucket cone | 10° | |
| The incoming line terminal of the main power supply adopts the form | three-phase four-wire system | |
| Pending method | Spiral feeding (customer provided) | |
| Head and die head flange configuration mode | Bolt connection | |
| Operating station data display mode | The number is given priority to | |
| Better than the structure characteristics of the same industry | Good plasticizing, large output, reasonable design, high precision, and the selection of high-quality parts, parts selection of high-quality materials, mainly self-made processing, good stability, easy to control, the main frequency converter | |
spiral shell Pole |
diameter (mm) | 90 |
| active length (mm) | 1440 | |
| Quantity (root) | 2 | |
| Rodent form | Cone-shaped engagement | |
| Speed Speed (r/min) | 1-36.9r/min (Dioutward) | |
| Nitrogen infiltration depth (mm) | 0.6~0.7 | |
| Can you eat the shredder | ability | |
| Screw core cooling mode | Internal circulation water cooling | |
material a section of thick bamboo |
Material cylinder form | unitary |
| Heating method | The cylinder is air-cooled, special stainless steel casing cast aluminum heater | |
| Number of drum heating segments (segment) | 5 | |
| Heating power (kw) | 24 | |
| Temperature control range is (ºC) | 50~300 | |
| Number of drum cooling sections (segment) | 4 | |
| The nose connection sleeve | 3 Cr 13 stainless steel, hard chrome plated surface treatment, internal confluence form | |
| Cooling control | 3X0.25Kw Fan control | |
| cooling medium | air | |
| Warranty measures of screw and material cylinder | Provide test blocks and test reports. | |
| Nitrogen infiltration depth (mm) | 0.6~0.7 | |
| Transmission deceleration system | Main drive motor power (kw) | 37 KW at Siemens |
| Working mode of the main drive motor | Three-phase induction motor, connected to the reducer through the coupling | |
| Reducer box form | Gear deceleration, using the form of hard tooth plane oblique tooth surface combination | |
| reducing gear | Carburizing tooth grinding treatment, the material is 20C rMoTi | |
| Distribusign gearbox form | The two distribution shafts are driven by super bevel gears | |
| Speed control mode of the main drive motor | AC frequency conversion speed regulation, frequency converter using imported | |
exhaust system |
Vacuum pump pattern | Straight-connected water ring sealed vacuum pump |
| Vacuum pump motor power (kw) | 3 | |
| Working mode of the vacuum pump motor | Three-phase asynchronous motor | |
| Vacuum pump Vacuum degree (MPa) | 0~-0.08 | |
| Number of vacuum pumps | A | |
| Quantitative feeding system | Method of feeding | Quantitative feeding |
| Feeding screw rotation speed (r/min) | 0.5~30 | |
| Motor power (Kw) | 1.5 | |
| Motor rotation speed (r/min) | 10~1200 | |
| Motor speed regulation mode | AC frequency conversion speed regulation | |
| Motor working mode | Three-phase Asynchronous motor, directly connected with the reducer | |
| Vacuum box length | 6 Meters |
| Vacuum box width | 0.6 Meters |
| Vacuum long | 0.3 Meters |
| Water and gas joints | 20 |
| Suitable for product width | And 50-200 mm |
| Longitudinal motor | 0.75 Kw |
| water pump | 4 Kw. 1 set |
| Vacuum pump pattern | Direct connection water ring sealed vacuum pump |
| Power of the vacuum pump motor | 4 Kw. 1 set |
| Working mode of the vacuum pump motor | △ connection |
| Vacuum Deity (MPa) | 0~-0.09Mpa |
| Vacuum pump number, vacuum pump installation situation, whether there is a shock prevention, noise prevention measures | Domestic high quality vacuum pump, with silencing device and integral bottom plate; high installation accuracy, anti-vibration and overcurrent protection. |
| Set box box form | Above are visible plxiglas window |
| Position and mode of the nozzle joint | Location: around the pipe, mode: screw |
| Center-high adjustment mode | hand movement |
| Whether the electric control box has waterproof measures | have |
| There is no air drying equipment | not have |
| Water temperature control | Use the temperature controller to automatically adjust the water temperature and automatically change the water |
| hauling speed | 0.3~8m/min |
| Traction deceleration motor power | 3 Kw, domestic high-quality speed reducer motor |
| Traction motor wiring mode | Y-shaped connection method |
| Traction motor speed | 10~1500r/min |
| Track contact effective length | 1.5m |
| Speed adjustment mode of the traction motor | Inverter |
| Connecting mode of rubber block and track | Screw connection type, reliable installation and fastening, convenient disassembly |
| The rubber block specification and the material of the reinforcing parts in the rubber block |
Rubber block specification 195X 45X35, lined steel plate Q235, using the formula provided by Korean manufacturers, reliable wear resistance |
| Crawler grip block width | 190mm |
| Cping force adjustment mode | Adjust the clamp force with the pressure reducing valve |
| Compressed air consumption | 10 l/min |
| Tractor height | 1250mm |
| Maximum noise is allowed | 40(db ) |
| Compressed air pressure | 0.5~0.7MPa |
| Oil injection mode of the track chain | Hand-add butter |
| Whether the traction machine and the cutting machine are connected | independence |
| way | Lift the knife to cut |
| Cut cylinder model | SC80X50 |
| Maximum pressure | 1.0Mpa |
| Cut power | 3 KW |
| Compressed air pressure | 0.4-0.6MPa |
| Compressed air flow | <0.3M³/h |
| Maximum noise volume during cutting | <75 Db |
| reduction box | International trade reducer |
| weight | 400kg |
){kind=link}